Saturday, June 11, 2011

Project 1: Self-Critique

Original Toy:

Model:





The model appears similar to the toy and has the general shape. It possesses similar colour with the toy and a Phong E texture to show its shiny, plastic appearance (The toy's plastic but the actually monster is metallic. Hence, the texture served a dual purpose). Much of the proportions are alright and the shape of the eyes, nose and hole on the head appear circular. Extrusions are properly applied for some of the details.

Some of the model's flaws followed. The arm are symmetrical while the toy's isn't. Though this doesn't really make the model horrid, it still does not follow the original toy. Another immediately noticeably flaw is the size of the model's head, which is large in comparison with the toy. The lower jaw is especially large and unlike the toy, the head is straight. The head is supposed to tilt downwards, hence another flaw. The model itself in standing straight while the toy is hunched. Body details are too small. Also, the legs and body are squarish while the arms are to circular, hence it does not exactly resemble the toy. The body itself and very wide and the head appears squished. The tail appears flattened and barely circular while the toy's tail is circular. The tail's vertexes are also not merged with the main body's and merging is virtually impossible due to different number of vertexes. The second "fin" behind the head does not resemble the toy, instead being concave rather than convex. The teeth are also flat, unlike the thick teeth of the model. The model is also missing the tongue, although the mouth it still coloured pink to resemble the tongue.

The final model resembles much of my initial conception. I somehow knew that it will appear cubic rather than circular for some of the limbs, most notably the legs. I also conceived the head to appear flat from the front but it will greatly exaggerated in the model, hence I had to stretch it out to appear large. Overall, despite the many flaws of the model, I am satisfied with the model.

Project 1: Research

I've searched and read quite a number of tutorials on how to do models of dinosaurs and claws, since Aron himself appears like a dinosaur. Thus far, most of my research shows similar ways on how to make sharp edges of dinosaur-like models with ease and it isn't entirely new to me: Vertex and extrusion.

Modifying vertex little by little along with multitudes of extrusions seem to help achieve shapes which may appear intimidating to make at first, despite its simplicity and tedium. Taking my time to modify the vertex for the detail and extruding to move on to another limb may yield good results. Extrusion especially helps when dealing with a cube since quad faces needed to be maintain. Regardless, however, once I make the pointed edge of the claw, the faces around it will be triangles when I merge the vertexes together.

This may apply to Aron's horns. Initially, I wanted to make a separate model for it, using the primitive cone. This may seem simpler but I will have to merge the vertexes of the two models later, adding to tedium. Then, I switched to using a circle and a curve for it to extrude on but once again, it will produce a separate model. Hence, I have to add in more edges to the main body using the edge loop tool and pull out the vertexes little by little from the main body, making a horn.

Regardless, some of the "failed" techniques is still useful in other areas, most notably the tail. The tail lays on the ground and bends to Aron's right, losing any possibility for making symmetry for it unless I use a method which allows it to bend, which I was unable to find. Merely extruding the tail from half of the main body will not yield the intended result, unlike the horns or claws, which has symmetry.

Hence, for the tail, I will use an extrusion along a curve, using a circular drawing or a cube. Scale shall be set to 0 to make a pointed, a method I initially planned for the horns.

Another method which I researched on is to simply make a large plane polygon and place a texture on it, showing an image of your intended model. It can then serve as a guide and multiple images can be used for the different views. Some videos show that this can greatly help in making virtually any model, even the ones that may appear complicated such as a dinosaur shaped model. Along with extrusion and vertex modifying, I won't have to rely on imagination or assumptions anymore.

Project 1: Design


This is the plan I had before going about with making the model. Most, if not all, of the models will start out as a cube and will undergo many extrusions or vertex modifications to make up Aron's shape. Cube was chosen because I want to maintain quad faces rather than triangular ones, although I may have to make triangular faces when dealing with sharp points such as the horns. Even the curvy parts, such as the paw and the legs, will start out as a cube. I may, or may not, use beveling but I will use a lot of smoothing so that rounded areas will appear rounded instead of jagged.

Sunday, May 29, 2011

Project 1: Shape

As the story may have suggested, the toy is a monstrous looking beast. There will be about 4 different parts: Head, Tail, Leg and Arm. I will probably try to use cubes for all 4 parts and create a symmetry once I am done.I may add smoothness, phong and bumps as the monster was supposed to be metallic.

I will mostly likely use a lot of extrusion as I will try to maintain a quadrilateral shape for the faces. Other aspects, such as beveling, may not be done. The model will be a challenge to do but I believe I can do it.

Project 1: Story

Feared by many for his menacing appearance, Aron was deeply saddened when other toys turned him away. Few truly knew him, a kind gentleman with a shell of a monster. The rat have been observing him, having plans for the kind monster. Hiring him, Aron played a huge role in the race, serving as the menacing monster who stood between the rat and the finish line. Though he is finally glad to be hired by someone, having his appearance abused once again saddened him within.

Saturday, May 21, 2011

Week 3 Exercises



Making the bucket wasn't too tough, though tedious. Everything went smoothly with the instructions except for the Boolean > Difference portion of it, where I have to make holes for the connectors. Maya did not seem to be able to recognize the cylinder, instead creating a Boolean > Union. Hence, I was forced to skip the step. Regardless, it wasn't too hard and making the vase was rather quick, though not as neat as my bucket.


 The tracks were finished faster than the bucket and with the tutorial, I learned how to make my own model from a sketch. Initially, I thought bending the track requires the use of Vertex but I never imagined that it needs to revert to Animation mode. Unlike the bucket, no serious errors were encountered.

Just like the tracks, the washing board was done rather quickly and without any serious errors. The only true problem I had was the Align Tool, since I still not sure on how it is supposed to work. In the end, I had to manual align the pieces myself. Still, it turns out pretty similar to the intended model.

Wednesday, May 18, 2011

Week 4 E-learning


 Multi-tasking is a very common sight amongst students these days and I admit that I do multi-task at times. I would sometimes eat while playing a game, or listen to music while listening to my lecturer in class. Most of time, I do it so that I can accomplish several things at once, though not effectively. At other times, I multi-task to prevent myself from getting bored. Multi-tasking sometimes stress me out, however, as I usually have a hard time doing many things at once and I feel that I should try to avoid it if I can.
 
  • Does multi-tasking give you a real or false sense of having accomplished something?

                No, I don’t feel any sense of accomplishment. I tend to panic when I was forced into multi-tasking because I know I will miss something important out. The only exception is when I listen to music, as music prevents me from getting dull. One ear listens to music while the other listens to the teacher.

  • Is learning 3D and design different from learning programming, or is all learning the same?Why?

                It is more or less the same as it involves understanding the basics before going into the advanced stages, like learning the primitive shapes or the simple coding in Action Script. Both subjects also require full attention and a bit of common sense to properly understand it.

·         The article states that “Learning is actually a very complex operation for an individual”. Do you agree with this? Do you feel that you approach your learning in the best way – if yes, how, and if no, how can you change your work style?

            Yes I do agree. Yes, I do feel that I approach my learning the best way. I will generally try to listen as much as I can in class while avoiding distractions if I could. Outside class, I occasionally try out, in the case of IN3D, making some random models, do projects or simply read more about model making. I might even explore more, such as animation or colouring.

·         What are your thoughts about the last paragraph in the extract?

           I think that the paragraph makes sense as I personally have seen teams crumble in the past due to miscommunication or total lack of communication. Success cannot always be grasped alone and communicating with fellow teammates will make journey smoother and merrier. Communication also helps with our skills in speaking with strangers, especially in jobs where a client is involved.

·         Should your lecturers also focus on your work attitude, or just leave you to sink or swim on your own? Why?

            I think our lecturers should also focus on our work attitude. Some of us may find that annoying as it is similar to nagging or forcing a change but some of us tend to appreciate the attention we get. Hostility is more likely to occur if lecturers show little care for one’s work attitude and students can better understand their own problems when approached by a lecturer about their work attitude.